Organochlorine concentrations in franciscana dolphins, Pontoporia blainvillei, from Brazilian waters

Blubber samples were collected from ten franciscana dolphins either incidentally captured in fishing operations or stranded on São Paulo (SP) and Paraná (PR) states littoral, Southeastern and Southern Brazilian coast, respectively. Determination of PCB, DDT and HCB concentrations were performed by capillary gas chromatograph coupled to electron capture detector (ECD). ΣDDT, ΣPCB and HCB concentrations ranged from 264 ng g⁻¹ to 5811 ng g⁻¹ lipid, from 909 ng g⁻¹ to 5849 ng g⁻¹ lipid and from 10 ng g⁻¹ to 61 ng g⁻¹ lipid, respectively. Regarding DDTs, the distribution of the mean percentages decreased in the following order: p,p′-DDE > p,p′-DDD > p,p′-DDT. The ΣDDT/ΣPCB ratio varied between 0.27 and 0.42 in Northern and Central SP coast, while in Southern SP and PR coast the values were 1.6 and 1.9, respectively. Dissimilarities in ΣDDT/ΣPCB ratios point to different sources of organochlorine compounds to franciscana dolphins in the study area. Considering the endocrine disruptive action of organochlorine compounds, the concentrations found in franciscana dolphins from Brazilian waters may represent an additional obstacle to the conservation of this endangered cetacean species.     

Oxygenated gasoline release in the unsaturated zone - Part 1: Source zone behavior

Oxygenates present in gasoline, such as ethanol and MTBE, are a concern in subsurface contamination related to accidental spills. While gasoline hydrocarbon compounds have low solubility, MTBE and ethanol are more soluble, ethanol being completely miscible with water. Consequently, their fate in the subsurface is likely to differ from that of gasoline. To evaluate the fate of gasoline containing oxygenates following a release in the unsaturated zone shielded from rainfall/recharge, a controlled field test was performed at Canadian Forces Base Borden, in Ontario. 200L of a mixture composed of gasoline with 10% ethanol and 4.5% MTBE was released in the unsaturated zone, into a trench 20cm deep, about 32cm above the water table. Based on soil cores, most of the ethanol was retained in the source, above the capillary fringe, and remained there for more than 100 days. Ethanol partitioned from the gasoline to the unsaturated pore-water and was retained, despite the thin unsaturated zone at the site (~35cm from the top of the capillary fringe to ground surface). Due to its lower solubility, most of the MTBE remained within the NAPL as it infiltrated deeper into the unsaturated zone and accumulated with the gasoline on top of the depressed capillary fringe. Only minor changes in the distribution of ethanol were noted following oscillations in the water table. Two methods to estimate the capacity of the unsaturated zone to retain ethanol are explored. It is clear that conceptual models for sites impacted by ethanol-fuels must consider the unsaturated zone.     

Vehicular particulate matter emissions in road tunnels in Sao Paulo, Brazil

In the metropolitan area of S?o Paulo, Brazil, ozone and particulate matter (PM) are the air pollutants that pose the greatest threat to air quality, since the PM and the ozone precursors (nitrogen oxides and volatile organic compounds) are the main source of air pollution from vehicular emissions. Vehicular emissions can be measured inside road tunnels, and those measurements can provide information about emission factors of in-use vehicles. Emission factors are used to estimate vehicular emissions and are described as the amount of species emitted per vehicle distance driven or per volume of fuel consumed. This study presents emission factor data for fine particles, coarse particles, inhalable particulate matter and black carbon, as well as size distribution data for inhalable particulate matter, as measured in March and May of 2004, respectively, in the Janio Quadros and Maria Maluf road tunnels, both located in S?o Paulo. The Janio Quadros tunnel carries mainly light-duty vehicles, whereas the Maria Maluf tunnel carries light-duty and heavy-duty vehicles. In the Janio Quadros tunnel, the estimated light-duty vehicle emission factors for the trace elements copper and bromine were 261 and 220 microg km(-1), respectively, and 16, 197, 127 and 92 mg km(-1), respectively, for black carbon, inhalable particulate matter, coarse particles and fine particles. The mean contribution of heavy-duty vehicles to the emissions of black carbon, inhalable particulate matter, coarse particles and fine particles was, respectively 29, 4, 6 and 6 times higher than that of light-duty vehicles. The inhalable particulate matter emission factor for heavy-duty vehicles was 1.2 times higher than that found during dynamometer testing. In general, the particle emissions in S?o Paulo tunnels are higher than those found in other cities of the world.     

Environmental performance evaluation of agro-industrial innovations – part 1: Ambitec-Life Cycle,a methodological approach for considering life cycle thinking

As sustainability considerations increasingly dominate the technology development debate worldwide, practical approaches to assess environmental performance of innovations have been warranted. The present study (Part 1) introduces Ambitec-Life Cycle, a method derived from Ambitec-Agro for considering life cycle thinking in the environmental performance evaluation (EPE) of agro-industrial innovations. An agro-industrial innovation case study related to residue recycling is presented, revealing steps in the product life cycle where opportunities are best for technological improvements. In Part 2 (this issue) of this study, a methodological approach for considering the environmental vulnerability of watersheds and to integrate this analysis in EPE methods is presented. This approach is applied to Ambitec-Life Cycle and to the same residue case study, allowing the identification of performance indicators with greater potential to cause impacts at the studied watersheds.     

Effects of ozone fumigation treatment on the removal of residual difenoconazole from strawberries and on their quality

The effect of ozone fumigation on the reduction of difenoconazole residue on strawberries was studied. Strawberries were immersed in 1.0 L of aqueous solution containing 400 μL of the commercial product (250 g L^?1 of difenoconazole) for 1 min. Then, they were dried and exposed to ozone gas (O₃) at concentrations of 0.3, 0.6 and 0.8 mg L^?1 for 1 h. The ozone fumigation treatments reduced the difenoconazole residue on strawberries to concentrations below 0.5 mg kg^?1, which corresponds to a 95% reduction. The strawberries treated with ozone and the control group, which was not treated with ozone, were stored at 4°C for 10 days. Some characteristics of the fruit were monitored throughout this period. Among these, pH, weight loss and total color difference did not change significantly (P > 0.05). The fumigation with ozone significantly affected the soluble solids, titratable acidity and ascorbic acid content (vitamin C) of the strawberries preventing a sharp reduction of these parameters during storage.     

Evaluation of modeling as a tool to determine the potential impacts related to drilling wastes in the Brazilian offshore

Numerical models that predict the fate of drilling discharges at sea constitute a valuable tool for both the oil industry and regulatory agencies. In order to provide reliable estimates, models must be validated through the comparison of predictions with field or laboratory observations. In this paper, we used the Offshore Operators Committee Model to simulate the discharges from two wells drilled at Campos Basin, offshore SE Brazil, and compared the results with field observations obtained 3 months after drilling. The comparison showed that the model provided reasonable predictions, considering that data about currents were reconstructed and theoretical data were used to characterize the classes of solids. The model proved to be a valuable tool to determine the degree of potential impact associated to drilling activities. However, since the accuracy of the model is directly dependent on the quality of input data, different possible scenarios should be considered when used for forecast modeling.     

Elemental levels in tree-bark and epiphytic-lichen transplants at a mixed environment in mainland Portugal, and comparisons with an in situ lichen

Samples of Platanus hybrida Brot. bark and Flavoparmelia caperata (L.) Hale thalli, from a clean area in northern Portugal (Bai?o), were transplanted into an exposure location at the south-western Atlantic coast, impacted by urban-industrial emissions (Sines), for a 10-month long experiment. Bark pieces were confined into nylon bags (2-mm mesh), and lichen thalli kept with their bark substrate (Pinus pinaster (Ait.) Sol.). Every two months, a double set of transplants (one for bark, one for lichens) was brought back into the laboratory, together with native samples of Evernia prunastri (L.) Ach. Following suitable cleansing and preparation procedures, field samples were put through INAA for elemental assessment. The results indicate that, regardless of signal magnitude, (1) concentrations in bark and lichen transplants are significantly correlated with atmospheric deposition for an appreciable number of elements; (2) there are a number of significant correlations between transplanted and native samples, and again between the latter and the deposition; and (3) the elements with biological patterns that follow the deposition in either transplanted or native samples (Co, V) are the very ones whose bioaccumulation seems to benefit from an alternation of wet-dry periods, which fits the precipitation record of the test site during the exposure term.     

The effects of the nitrofuran furaltadone on Ulva lactuca

The use of pharmaceuticals in the food production industry as prophylatic and therapeutic agents is necessary to promote animal health, but may entail significant consequences to natural ecosystems, especially in the cases of overdosing and use of banned pharmaceuticals. The vast effects that antibiotics released into the environment have on non-target organisms are already under the scope of researchers but little attention has been given to primary producers such as macroalgae. The present study assessed furaltadone’s, an antibacterial agent illegally used for veterinary purposes, uptake capacity by Ulva lactuca and its effect in the growth of this cosmopolitan macroalgae. Differences in macroalgal growth were shown when submitted to prophylactic and therapeutic concentrations of furaltadone in the water (16 and 32 μg mL⁻¹, respectively). The therapeutic concentration caused higher growth impairment than the prophylactic treatment did, with 87.5% and 58% reductions respectively. Furthermore, together with data collected from the accumulation assays, with values of internal concentrations as high as 18.84 μg g⁻¹ WW, suggest that the macroalgae U. lactuca should be included in field surveys as a biomonitor for the detection of nitrofurans.     

Bioaccumulation behaviour of transplants of the lichen Flavoparmelia caperata in relation to total deposition at a polluted location in Portugal

This experiment compares the short and long time element accumulation behaviour of transplants of Flavoparmelia caperata lichen thalli and total deposition in an atmospheric polluted area. It was found that lichens exposed for a short time behaved differently from lichens in cumulative exposition suggesting the presence of acclimatization behaviour. The lichen transplant elemental content does not unequivocally represent the average or cumulative environmental availability of the exposure period. Reflection characteristics depend on the element and the lichen physiological conditions. Good correlations between lichen elemental contents and total deposition were obtained when a physiological lichen parameter was introduced in a mathematical model, suggesting that metabolically mediated accumulation is important.